Photovoltaics with Storage Cheaper than Fossil Power Plants

THE SUN-MASTER KNOWLEDGE BLOG

Request a quote

Fraunhofer ISE Confirms: Systems are Economical and Future-Proof

A current study by Fraunhofer ISE shows: Photovoltaics combined with battery storage systems are already more cost-effective today than the new construction of conventional fossil power plants.

For SUN-MASTER customers, this means: With our storage systems, you invest not only in sustainability but also in maximum cost-effectiveness.

The energy transition is not only an ecological necessity; it also pays off economically. This is shown by a current study from the Fraunhofer Institute for Solar Energy Systems (ISE): Photovoltaic systems with battery storage are already more cost-effective today than new fossil power plants. (Source: Fraunhofer ISE – Photovoltaics with Battery Storage Cheaper Than Conventional Power Plants)

What Does this Mean for Operators?

  • Lower Electricity Generation Costs:
    Electricity from solar and storage systems is significantly cheaper compared to fossil alternatives.
  • Investment Security:
    Those who rely on photovoltaics with storage secure stable and predictable energy costs in the long term.
  • Future Viability:
    Storage solutions ensure that solar power can be used even when the sun is not shining – a clear advantage over purely fossil structures.

SUN-MASTER with an Economical Solution for the Future

With our SUN-MASTER Energy Storage Module, we put precisely these findings into practice. They store solar energy efficiently, are modularly expandable, and ensure that businesses, municipalities, and private customers can save up to 80% of their energy costs.

Conclusion: The Fraunhofer study confirms what SUN-MASTER has been developing for years: Solar energy with storage is the most economical solution for the future. Those who invest in a SUN-MASTER energy system today benefit from low costs, high independence, and sustainable security.

Inquire Now

Request a quote

Frequently Asked Questions.

An overview.

Where Can the Energy Storage System be Placed and how is it Installed?

Our energy storage system is usually installed in a basement, cellar vault, or a
suitable storage room. For maximum safety – especially when multiple
modules are stacked on top of each other – our technicians perform a professional wall mounting.

The modules are delivered by freight forwarder or by our own team. Thanks to integrated rollers, they can be easily moved to the installation site, after which the rollers are removed. Alternatively, the modules can also be safely lifted using the integrated eyelet system. For stacking the energy storage modules, the eyelets can also be removed.

Our energy storage modules utilize particularly safe 48V technology. The installed LiFePO₄ cells are considered extremely reliable and, unlike conventional lithium-ion batteries, cannot self-ignite. This means for you: maximum safety with full performance.

In the front area of the storage system, where the electronics such as the BMS and wiring are located, our engineers have deliberately planned additional space. This ensures good ventilation and protects the components from overheating. At the same time, we remain flexible: In case of future adjustments – for example, due to new legal requirements or new state-of-the-art components – additional components can be easily integrated.

Fundamentally, our energy storage systems are very durable and low-maintenance. However, if a malfunction does occur, the failure is usually attributable to the electronics—specifically the BMS (Battery Management System) or the communication interfaces (RS485 / CAN bus). These components are subjected to greater stress than the actual LiFePO₄ cells, which are extremely robust and long-lasting.
The typical spare part costs per module are approximately:

BMS: €200–250
Communication Board: €250–300
LiFePO₄ Cell Unit: €150–200

Briefly explained:
BMS (Battery Management System): Monitors and protects the cells, ensures uniform charging and discharging.
RS485 / CAN-BUS: Enables communication between the storage system and the inverter and master module.

All components in the energy storage system are securely mounted and thus protected from vibrations. The stable aluminum frame provides additional stability, while the outer casing made of HPL panels offers particularly robust protection.

HPL (High Pressure Laminate) is a high-pressure laminate characterized by its extreme robustness: It is shock- and scratch-resistant, withstands moisture and UV radiation, and is flame-retardant (fire protection class B1). Thus, the internal components are reliably protected against external environmental influences such as heat, moisture, or mechanical stress – and the storage system remains operational long-term.

LiFePO₄ cells are considered particularly safe and are extremely rarely self-igniting. Should a fire nevertheless occur internally, it would not spread outwards: LiFePO₄ cells only ignite at around 200-250 °C, while the robust HPL panels of the outer casing are only flammable from approximately 400-500 °C. This means that even in extreme cases, fire spread is ruled out.
Even after installation, we are reliably there for you. Should components ever fail, you can reach us by phone from Monday to Friday between 8:00 AM and 5:00 PM at +49 39724-268000 or anytime by email at info@sun-master.de. Our nationwide installation service ensures that defective electronic components or individual cells are replaced directly on-site within three working days – quickly, professionally, and reliably.
Our energy storage systems usually consist of several modules. If a single module fails, the overall storage system remains functional – only the performance is reduced.
A storage system with 5 modules, each with 16 kWh capacity and 8 kW power, results in a total of 80 kWh capacity and 40 kW power. If one module fails, 64 kWh capacity and 32 kW power are still available. The storage system therefore continues to operate reliably, albeit with slightly reduced performance.
  • Production Facilities & Machine Halls (24/7 Operation): Even if a module fails, the energy supply remains stable, allowing machines to continue running. Production downtimes are thus reliably avoided.
  • Hospitals & Emergency Power Systems: In safety-critical areas, a continuous supply is crucial. Even if a module fails, the power supply remains guaranteed – an important factor for life support systems and sensitive medical equipment.

Thanks to the modular design, maximum operational reliability is thus ensured.

A possible failure is displayed directly in the SUN-MASTER App. There, you can not only monitor the status of your storage system, but also control yields and consumption, optimize self-consumption, and intelligently manage your energy flows.
Request a quote

Your contact with sun-master

Get a quote

Is a PV system already installed?*
What operating voltage is present? *
What type of inverter is present?*
Further information you would like to share: